Browsing Posts published by CodyH

Today we did a “p.m” at the united states postal service today.

A FSE megalift caught a tray on its way to pick another and caused it to crash. We are gonna give it our best to fix it by tomorrrow.

Today we adjusted the extractor table and retensioned the drive chains.

We went to the United States Marine Corps, Sorensen Cardiovascular @ the IMC Hosital and the Jordan School District to do some preventitive maintenance on some X’s 2s and a mobile.

We diagnosed a problem on a 25B Megalift that caused the Encoder and possibly the Frequency Converter to go out.

We are installing 59 sections of Tensco library shelving in Ephraim, UT.

Nationwide Shelving at 800-326-4403 dismateled shelving at the 4th district court in Salt Lake. Our customer wrote, The group were very polite and willing to accommodate our needs. They prefoprmed the disamteling in such a way they did not disrupt court proceedings or other matters going on at  the court.  We appreciate their hard work today!

We replaced a faulty ECU on a Remstar shuttle and also fixed a manufacutre error on a door. The ECU was not bad, learning the machine went well and everything went smooth, however the door was a bit tricky. We had to even out both sides of he shutter, drill a hole in the drive shaft and then put in our own drive pin in.

We did an install of a door motor on a Megastar FSE megalift. It took three of us and a half day to get old motor out, new one in and reistallation of the door.