NationWide Shelving CALL 800-326-4403

800-326-4403

Browsing Posts in Hoists & Equipment

BRIDGE CRANE END TRUCK KITS

April 12, 2010 Mr. Shelving No comments
BRIDGE CRANE END TRUCK KITS printable version
Bridge Crane End Truck Kits (both push-type and geared-type) contain all parts needed, except the bridge beam and trolley stop angles to build underhung, single girder crane bridges in rated loads and spans (center-to-center distance between runway beams). Yellow enamel finish. Consult dealer for geared-type and motorized end truck pricing. FOB Shipping Point.

BRIDGE CRANE END TRUCK KITS
Click on the Product No(s). below to view further information and order now!
BRIDGE CRANE END TRUCK KITS
Product No. Capacity (tons) Max. Span Wheel Base Runway A.S.I. Wt. (lbs.) Price Ea.
H81124ET-1/2 1/2 24′ 36″ 3-6″ 156 $729.33
H81124ET-1 1 24′ 36″ 3-6″ 214 $729.33
H81124ET-2 2 24′ 36″ 3.3-6″ 270 $830.67
H81130ET-2 2 30′ 42″ 3.3-8″ 310 $830.67
H81130ET-3 3 36′ 54″ 5.5-8″ 390 $1,606.67

Hoists & Equipment none
Read more

BEECH COUNTERWEIGHTED CRANE

April 12, 2010 Mr. Shelving No comments
BEECH COUNTERWEIGHTED CRANE printable version
  • Provides safe lifting in close quarters.
  • Perfect in machine shops, injection mold shops and other areas where legs out front get in the way.

Each crane is proof loaded at 150% of its rated capacity to insure integrity and is equipped with a safety valve to prevent dangerous overloading. Hydraulic lift is controlled by a hand pump and precision lowering is regulated by a needle valve. All cranes are shipped complete with extension boom, safety swivel hook, counterweights, steering handle and roller bearing phenolic wheels. Exceeds ASME PALD-12 and ANSI Z535 standards. Optional wheels, floor lock and power lift option featuring deep cycle battery — fully automatic charger plus a remote pendant on 20′ coil cord available — contact dealer for details. FOB Shipping Point.

BEECH COUNTERWEIGHTED CRANE
Click on the Product No(s). below to view further information and order now!
BEECH COUNTERWEIGHTED CRANE
Product No. Boom In
Cap. (lbs.)		 Boom Out
Cap. (lbs.)		 Boom Reach Boom Height Load
Wheel Size		 Steering
Wheel Size		 Overal Size
L x W x H		 Wt. (lbs.) Price Ea.
HB-500CW 500 350 41-59″ 9-104″ 6 x 2″ 4 x 2″ 50 x 31 x 58″ 980 $2,447.00
HB-750CW 750 475 46-54″ 6-104″ 8 x 2″ 5 x 2″ 63 x 31 x 64″ 1700 $3,300.00
HB-750CW w/Power Lift 750 475 46-54″ 6-104″ 8 x 2″ 5 x 2″ 63 x 31 x 64″ 1755 $4,985.00
HB-1000CW 1000 600 46-54″ 6-104″ 8 x 2″ 5 x 2″ 63 x 31 x 64″ 1735 $3,747.00
HB-1000CW w/Power Lift 1000 600 46-54″ 6-104″ 8 x 2″ 5 x 2″ 63 x 31 x 64″ 1790 $5,132.00
HB-1500CW 1500 750 52-90″ 8-135″ 8 x 3″ 6 x 2″ 74 x 31 x 76″ 2455 $4,400.00
HB-1500CW w/Power Lift 1500 750 52-90″ 8-135″ 8 x 3″ 6 x 2″ 74 x 31 x 76″ 2510 $5,785.00
HB-2000CW 2000 1000 52-90″ 8-135″ 8 x 3″ 6 x 2″ 74 x 31 x 76″ 3035 $5,737.00
HB-2000CW w/Power Lift 2000 1000 52-90″ 8-135″ 8 x 3″ 6 x 2″ 74 x 31 x 76″ 3090 $7,122.00
Hoists & Equipment none
Read more

ALUMINUM GANTRY CRANES

April 12, 2010 Mr. Shelving No comments
ALUMINUM GANTRY CRANES printable version
Ideal for use in multiple or remote locations. These units are unaffected by weather and/or wet conditions. Provides safe, one-person lifting of heavy equipment in a variety of work sites. Its lightweight design enables for quick assembly and knockdown. The welded aluminum cranes have adjustable I-beams for an infinite number of span settings, plus 2 adjustable height uprights. Includes 4 position swivel locks for secure placement. Hoist and Trolley available. FOB Shipping Point.

ALUMINUM GANTRY CRANES
Click on the Product No(s). below to view further information and order now!
ADJUSTABLE HEIGHT ALUMINUM GANTRY CRANES
Product No. Cap. (lbs.) Beam Length* Height Clear Under Beam Wt. (lbs.) Price Ea.
HAHA-2-8-10** 2000 8′ 6″ 7′8″-10′2″ 192 $2,512.00
HAHA-2-8-12** 2000 8′ 6″ 9′6″-12′ 201 $2,637.00
HAHA-2-10-10** 2000 10′ 6″ 7′8″-10′2″ 200 $2,607.00
HAHA-2-10-12** 2000 10′ 6″ 9′6″-12′ 209 $2,745.00
HAHA-2-12-10 2000 12′ 8″ 7′8″-10′2″ 234 $3,065.00
HAHA-2-12-12 2000 12′ 8″ 9′6″-12′ 246 $3,216.00
HAHA-4-8-10 4000 8′ 8″ 7′8″-10′2″ 265 $3,452.00
HAHA-4-8-12 4000 8′ 8″ 9′6″-12′ 279 $3,650.00
HAHA-4-10-10 4000 10′ 8″ 7′8″-10′2″ 309 $4,030.00
HAHA-4-10-12 4000 10′ 8″ 9′6″-12′ 335 $4,368.00
HAHA-4-12-10 4000 12′ 8″ 7′8″-10′2″ 325 $4,272.00
HAHA-4-12-12 4000 12′ 8″ 9′6″-12′ 351 $4,621.00

(4)-8″ 4 position swivel lock casters standard.
*Usable distance between uprights is overall beam length minus 18″.
**Usable trolley travel length is overall beam length minus 24″.
Hoists & Equipment none
Read more

AIRSTAR AIR HOIST

April 12, 2010 Mr. Shelving No comments
AIRSTAR AIR HOIST printable version
  • Efficient and safe air hoist.
  • Features pull cord control for accurate control of loads.

Compact and lightweight. Features variable lifting speeds. Includes Swivel Hook suspension. Equipped with standard link chain. Multi-vane rotary air motor for smooth operation. Recommended air pressure 90 PSI.

Air inlet: 3/8” NPTF. Capacities from ¼ to 1 ton.

Lifetime warranty. Made in USA.

Includes chain container. FOB Shipping Point.

AIRSTAR AIR HOIST
Click on the Product No(s). below to view further information and order now!
AIRSTAR AIR HOIST
Product No. Cap. (tons) Lift Height Max. Lift Speed (fpm) Max. Lowering Speed (fpm) Wt. (lbs.) Price Ea.
H7400C 1/4 10′ 65 95 41 $2,482.50
H7401C 1/2 10′ 45 120 41 $2,488.13
H7402C 1 10′ 23 60 58 $3,059.06

Longer lifts available.
Hoists & Equipment none
Read more

ADJUSTABLE SPREADER BEAMS

December 10, 2009 Mr. Shelving No comments
ADJUSTABLE SPREADER BEAMS printable version
  • Safely pick up uneven loads and keep them level.
  • Spread can range from 8″ to 72″ in 4″ increments.

Total loading capacity is 4000 lbs. Center clevis can be adjusted in 4″ increments. Clevis slides between two 5″ channels. Blue in color. FOB Shipping Point.

ADJUSTABLE SPREADER BEAMS
Click on the Product No(s). below to view further information and order now!
ADJUSTABLE SPREADER BEAMS
Product No. Cap. (lbs.) Spread Min. Spread Max. Upper Bail
W x L		 Lower Bail
W x L		 Headroom Wt. (lbs.) Price Ea.
HSBM-25 2500 8″ 6′ 2.5 x 5″ 1-1/2 x 4-1/2″ 15-3/4″ 132 $469.00
HSBM-40 4000 10″ 6′ 3 x 5-1/2″ 2 x 4″ 16-1/4″ 276 $591.00
HSBM-80 8000 12″ 8′ 4 x 7-1/4″ 3 x 5-1/4″ 23-1/4″ 443 $897.00

Additional upper and lower bails available.
Hoists & Equipment none
Read more

ADJUSTABLE & FIXED STEEL GANTRY CRANES

December 10, 2009 Mr. Shelving No comments
ADJUSTABLE & FIXED STEEL GANTRY CRANES printable version
  • Designed to be portable with or without a load.
  • Solid steel construction will provide years of service.
  • Large diameter casters will facilitate easy mobility from one workstation to another.
  • Painted Royal Blue. Shipped KD. Hoist and Trolley available. FOB Shipping Point.
  • Adjustable in 6″ increments.
  • 4 Position 8″ swivel casters standard.
  • Designed to be portable. (Do not move units while loaded)

ADJUSTABLE & FIXED STEEL GANTRY CRANES
Click on the Product No(s). below to view further information and order now!
ADJUSTABLE HEIGHT STEEL GANTRY CRANES
Product No. Cap. (lbs.) Beam
Length*		 Beam
Height		 Under I-Beam Height Base Width Wt. (lbs.) Price Ea.
HAHS-2-10-12 2000 10′ 6″ 7′6″-12′ 77″ 890 $1,794.00
HAHS-2-10-14 2000 10′ 6″ 8′6″-14′ 89″ 996 $1,980.00
HAHS-2-15-12 2000 15′ 6″ 7′6″-12′ 77″ 978 $1,973.00
HAHS-2-15-14 2000 15′ 6″ 8′6″-14′ 89″ 1084 $2,109.00
HAHS-2-20-12 2000 20′ 8″ 7′6″-12′ 77″ 1066 $2,090.00
HAHS-2-20-14 2000 20′ 8″ 8′6″-14′ 89″ 1066 $2,278.00
HAHS-4-10-12 4000 10′ 8″ 7′6″-12′ 77″ 967 $1,921.00
HAHS-4-10-14 4000 10′ 8″ 8′6″-14′ 89″ 1071 $2,081.00
HAHS-4-15-12 4000 15′ 8″ 7′6″-12′ 77″ 1059 $2,105.00
HAHS-4-15-14 4000 15′ 8″ 8′6″-14′ 89″ 1264 $2,458.00
HAHS-4-20-12 4000 20′ 10″ 7′6″-12′ 77″ 1291 $2,602.00
HAHS-4-20-14 4000 20′ 10″ 8′6″-14′ 89″ 1395 $2,773.00
HAHS-6-10-12 6000 10′ 8″ 7′7″-12′1″ 78″ 998 $1,983.00
HAHS-6-10-14 6000 10′ 8″ 8′7″-14′1″ 90″ 1101 $2,142.00
HAHS-6-15-12 6000 15′ 10″ 7′7″-12′1″ 78″ 1195 $2,322.00
HAHS-6-15-14 6000 15′ 10″ 8′7″-14′1″ 90″ 1298 $2,525.00
HAHS-6-20-12 6000 20′ 10″ 7′7″-12′1″ 78″ 1322 $2,576.00
HAHS-6-20-14 6000 20′ 10″ 8′7″-14′1″ 90″ 1425 $2,780.00
HAHS-8-10-12 8000 10′ 10″ 7′7″-12′1″ 77″ 1103 $2,194.00
HAHS-8-10-14 8000 10′ 10″ 8′7″-14′1″ 90″ 1206 $2,345.00
HAHS-8-15-12 8000 15′ 10″ 7′7″-12′1″ 77″ 1230 $2,412.00
HAHS-8-15-14 8000 15′ 10″ 8′7″-14′1″ 90″ 1333 $2,614.00
HAHS-8-20-12 8000 20′ 12″ 7′7″-12′1″ 77″ 1485 $2,996.00
HAHS-8-20-14 8000 20′ 12″ 8′7″-14′1″ 90″ 1588 $3,183.00

*Deduct 10-1/2″ for distance between uprights.

FIXED HEIGHT STEEL GANTRY CRANES
Product No. Cap. (lbs.) Beam Length Beam Height Under I Beam
to Ground		 Base Width Wt. (lbs.) Price Ea.
HFHS-50 500 8′ 4″ 5′9″ 46 1/2″ 530 $941.00
HFHS-2-10 2000 10′ 6″ 10′ 64 1/2″ 635 $933.00
HFHS-2-15 2000 15′ 6″ 10′ 64 1/2″ 710 $1,043.00
HFHS-2-20 2000 20′ 8″ 10′ 64 1/2″ 890 $1,311.00
HFHS-4-10 4000 10′ 8″ 10′ 64 1/2″ 815 $1,088.00
HFHS-4-15 4000 15′ 8″ 10′ 64 1/2″ 903 $1,241.00
HFHS-4-20 4000 20′ 10″ 10′ 64 1/2″ 1142 $1,826.00

*Deduct 10-1/2″ for distance between uprights.

STEEL GANTRY CRANE OPTIONS
Product No. Description Price Ea.
HAHS-KIT 2-Come-a-long for height adjustment (not for lifting) $89.00
HAHS-2/4-TLC Total locking casters for 2,000 & 4,000 lb. units $140.00
HAHS-6/8-TLC Total locking casters for 6000 & 8000 lb. units $509.00
HAHS-FES-KIT Festoon kit, 115V AC power $124.00

*Deduct 10-1/2″ for distance between uprights.

ALUMINUM GANTRY CRANE OPTIONS
Product No. Description Price Ea.
HAHA-KIT 2-Come-a-long for height adjustment (not for lifting) $89.00
HAHA-2/4-TLC Total locking casters $134.00
HAHA-PNU 4-way locking 12″ x 3 1/2″ pneumatic casters-1500lb. cap. $264.00
HAHA-PNU-RF Retro-Fit 4-way locking 12″ x 3 1/2″ pneumatic casters-1500lb. cap. $405.00
HAHA-FES-KIT Festoon kit, 115V AC power $120.00

*Deduct 10-1/2″ for distance between uprights.
Hoists & Equipment none
Read more

DO-IT-YOURSELF” WALL OR COLUMN BRACKET KITS

December 10, 2009 Mr. Shelving No comments
“DO-IT-YOURSELF” WALL OR COLUMN BRACKET KITS printable version
  • Save money by assembling jib cranes with bracket kits.
  • Helps relieve existing overworked cranes… eliminates machine down time.

Utilize wasted air space over equipment and save valuable floor space. Fittings include top, bottom and end assembly. Made of high-grade ductile iron and equipped with roller bearings, grease fittings and cotter pin. Column boom, tie rods, tagline, mounting bolts are also available. Black enamel finish. FOB Shipping Point.

DO-IT-YOURSELF" WALL OR COLUMN BRACKET KITS
Click on the Product No(s). below to view further information and order now!
313 FULL CANTILEVER (2 FITTINGS)
Product No. Cap. Wt. (lbs.) Price Ea.
H752-4* 1/2 ton to 16′ Span
1 ton to 12′ Span		 45 $361.33
H752-5* 1/2 ton to 18′-20′ Span
1 ton to14′-20′ Span
2 ton to 12′ Span		 110 $573.33

* Stock Items.

311 TIE ROD TYPE (3 FITTINGS)
Product No. Cap. Wt. (lbs.) Price Ea.
H752-1* 1/2, 1 ton to 20′ Span 57 $510.67
H752-2* 2 ton to 20′ Span 140 $828.00

* Stock Items.
Hoists & Equipment none
Read more
© 2012 NationWide Shelving CALL 800-326-4403