NationWide Shelving CALL 800-326-4403

• Protect busy corners, expensive machinery and personnel.
• 90° perpendicular protection.

Durable and super tough for maximum protection. “Safety First” promotion reminds personnel of the number one priority. Powder coat yellow finish. Aluminum unit is unfinished. FOB Shipping Point.

B) Column Guard
Prevent costly damage to steel columns, pipe and tubing. Wrap around protection. 2 piece installation. Steel construction with powder coat finish.

C) Column/Gantry Guard
Prevent costly damage to steel columns, pipe or tubing. Wrap around protection. Steel construction with safety yellow powder coat finish.

FOB Shipping Point

• Floor-mounted protection equipment that serves as a barrier between forklift traffic and conveyor stands.

Made up of guard sections from 3’L. to 10’L. in 1’ increments. The sections can be joined to make a continuous straight run of any length in 1’ increments. Turns of 90° are accommodated through joining 2 opposite hand 45° conveyor guard sections. Includes ½” wedge anchors. FOB Shipping Point. 

Benefits of Conveyor Guards 

• Various length conveyor guard sections can be put together to make continuous runs to 1’ increments of length adjacent to conveyor stands.
• Highly visible, yellow powder coat painted steel units provide a durable and attractive barrier.
• Barriers are designed to withstand impact to keep valuable equipment safe from forklift traffic.
• Straight sections and 90 degree turns are easily accomplished using straight guide sections and pairs of 45 degree angle guard sections.
• Conveyor guard sections are constructed of sturdy 7 ga. steel formed into 12”H. x 6”W. units.
• 5 strengthening gussets are welded to the back of 6’ through 10’ sections. Shorter sections have 3 gussets.
• Sections are bolted together through matching vertical gussets and bolting with the supplied 5/16” bolts.

• Versatile 29′6″ unit that is easy to setup, transport and store.

Skipper features a 29′6″ belt to cordon off large areas quickly and easily. Its unique belt end connects to other Skippers, cone mount receiving ends (HSKIPRE), wall mount receiving ends (HHDRE), or it can wrap around practically any vertical object and connects to the belt itself. Because of the long length of protection and the typical flex in standard U.S. traffic cones, we strongly suggest using our 39″ tall Euro Cone with reflective collars. (Note: Euro Cone is not DOT approved.) Otherwise you need to double or triple stack normal U.S. cones or use the 7 lb. Cone Weight to get the cone to at least 17 lbs. FOB Shipping Point.

• Designed for confined areas and tight turns with less effort to dump.
• Built to handle the big, bulky capacity jobs.

Helps with savings on housekeeping and safety in the work place. Rugged construction of 14 ga. steel — completely leakproof. Rolls on long-wearing Moldon Rubber wheels. Green in color. FOB Shipping Point.
For Caster Options See: Self Dumping Hoppers Caster Options.
For Lids See: Self Dumping Hopper Lids. 

Steel Surcharge May Apply 

• Made of macerated canvas impregnated with phenolic resins for high capacity requirements.
• Rolls easily, quietly and protects the floor.

Resists shock, water and oil. Withstands -50°F to +250°F. Roller bearings. FOB Shipping Point.

• Precision-built for smooth, easy operation.
• Strength is assured with hardened steel with exacting tolerances.

Features one-piece wrap-around. .187 bracket. Swivel caster includes Zerk fitting. 5/8″ Kingpin. Top plate measures 3-3/4 x 4-5/8″. Bolt hole is 2-5/8 x 3-5/8″, slotted to 3 x 3″. Zinc plated. FOB Shipping Point.

Wheel Description

PAYVULC – Mold on rubber, cast iron center. 
PLEXITE – Phenolic, macerated canvas backing. 
MIRATEK – Polyurethane, 95 duro. red. 
PAYRON – Semi-steel machined gray iron. 
BRONCO – Non-marking gray mold-on rubber, bonded to aluminum center. 
PAYDUCTILE – Cast high tensile ductile iron. 
PAYFLEX – Cushion rubber, non-marking tread.
PAYROCK – Hard rubber, fibrous compound.
MIRAFLEX – 85 duro. gray polyurethane. 
MIRAKUSH – Polyurethane, 85 duro. gray. 
PAYTHANE – Urethane, bonded to a metal center.

• Designed for heavier applications.
• Made of hardened steel for toughness.   .225 top plate.

Features two large diameter ball bearing raceways. Swivel caster includes lube fittings. 5/8″ Kingpin. Zinc plated. Top plate measures 3-3/4 x 4-5/8″. Bolt Hole 2-5/8 x 3-5/8″, slotted to 3 x 3″. FOB Shipping Point.

Wheel Description

PAYVULC – Mold on rubber, cast iron center. 
PLEXITE – Phenolic, macerated canvas backing. 
MIRATEK – Polyurethane, 95 duro. red. 
PAYRON – Semi-steel machined gray iron. 
BRONCO – Non-marking gray mold-on rubber, bonded to aluminum center. 
PAYDUCTILE – Cast high tensile ductile iron. 
PAYFLEX – Cushion rubber, non-marking tread.
PAYROCK – Hard rubber, fibrous compound.
MIRAFLEX – 85 duro. gray polyurethane. 
MIRAKUSH – Polyurethane, 85 duro. gray. 
PAYTHANE – Urethane, bonded to a metal center.

• Rugged cold-forged steel series features two separate and large diameter ball bearing raceways.
• Includes lubrication fittings.

Top plate is 1/4″ cold forged and measures 4 x 4-1/2″. Bolt hole is 2-5/8″ x 3-5/8″, slotted to 3 x 3″. 1/4″ upper and lower raceways. 5/16″ load balls. 1/4″ balls for lower raceway. 5/8″ nut and bolt kingpin. Roller bearing. Zinc plated. FOB Shipping Point.

Wheel Description

PAYVULC – Mold on rubber, cast iron center.
PLEXITE – Phenolic, macerated canvas backing.
MIRATEK – Polyurethane, 95 duro. red.
PAYRON – Semi-steel machined gray iron.
BRONCO – Non-marking gray mold-on rubber, bonded to aluminum center.
PAYDUCTILE – Cast high tensile ductile iron.
PAYFLEX – Cushion rubber, non-marking tread.
PAYROCK – Hard rubber, fibrous compound.
MIRAFLEX – 85 duro. gray polyurethane.
MIRAKUSH – Polyurethane, 85 duro. gray.
PAYTHANE – Urethane, bonded to a metal center.