NationWide Shelving CALL 800-326-4403

• Floor-mounted protection equipment that serves as a barrier between forklift traffic and conveyor stands.

Made up of guard sections from 3’L. to 10’L. in 1’ increments. The sections can be joined to make a continuous straight run of any length in 1’ increments. Turns of 90° are accommodated through joining 2 opposite hand 45° conveyor guard sections. Includes ½” wedge anchors. FOB Shipping Point. 

Benefits of Conveyor Guards 

• Various length conveyor guard sections can be put together to make continuous runs to 1’ increments of length adjacent to conveyor stands.
• Highly visible, yellow powder coat painted steel units provide a durable and attractive barrier.
• Barriers are designed to withstand impact to keep valuable equipment safe from forklift traffic.
• Straight sections and 90 degree turns are easily accomplished using straight guide sections and pairs of 45 degree angle guard sections.
• Conveyor guard sections are constructed of sturdy 7 ga. steel formed into 12”H. x 6”W. units.
• 5 strengthening gussets are welded to the back of 6’ through 10’ sections. Shorter sections have 3 gussets.
• Sections are bolted together through matching vertical gussets and bolting with the supplied 5/16” bolts.

• Versatile 29′6″ unit that is easy to setup, transport and store.

Skipper features a 29′6″ belt to cordon off large areas quickly and easily. Its unique belt end connects to other Skippers, cone mount receiving ends (HSKIPRE), wall mount receiving ends (HHDRE), or it can wrap around practically any vertical object and connects to the belt itself. Because of the long length of protection and the typical flex in standard U.S. traffic cones, we strongly suggest using our 39″ tall Euro Cone with reflective collars. (Note: Euro Cone is not DOT approved.) Otherwise you need to double or triple stack normal U.S. cones or use the 7 lb. Cone Weight to get the cone to at least 17 lbs. FOB Shipping Point.

• Designed for confined areas and tight turns with less effort to dump.
• Built to handle the big, bulky capacity jobs.

Helps with savings on housekeeping and safety in the work place. Rugged construction of 14 ga. steel — completely leakproof. Rolls on long-wearing Moldon Rubber wheels. Green in color. FOB Shipping Point.
For Caster Options See: Self Dumping Hoppers Caster Options.
For Lids See: Self Dumping Hopper Lids. 

Steel Surcharge May Apply 

• Variable height work platforms raise employees to ergonomic work levels at 2-5/8″ increments.
• Flow through grid permits scrap and liquids to fall or drain below.
• Custom configurations are designed for free.

Modular design permits hundreds of floor plans. Assemble to desired height, length or width using patented “Stacker” & “Poly-Clip” system to fit any floor plan. Impervious to oils, gas, acids and most chemicals. No tools required –snaps together in seconds. Replace “unsafe” worn-out platforms and pallets. Made from strong, durable high impact plastic. Available with comfort matting and Plug-Lock System –connects mats to platform. Lightweight for ease in handling. Available with ramping system. Temporary or permanent. FOB Shipping Point.

• Protect building corners and walls against fork truck and vehicle damage.
• Works in conjunction with GR series straight rail.

FOB Shipping Point.

• Angular and rotational movement allow assembly access.

Features linear bearings for smooth radial motion. Rated at 200 in-lbs. Reach 16-34″ vertical post swivel 360 degrees. All air lines and tool connection hardware included.

Nasco Sidekick Torque Reaction Arms

• A complete assembly system for air & electric tools.

Designed to absorb the shock transmission of power drivers so that no torque reaction will be transferred to the operator’s hand. Systems balance the weight of the tool, improve tool accessibility and provides a more ergonomically desirable workstation. FOB Shipping Point.