The 2180 Wire Security Cage System |
Tubular Frame Panel Wire Security Cage |
Welded Wire Mesh Security Cage |
Sliding Doors For Wire Security Cages
|
Attractive and secure, the 2180 system is ideal for data center computer security cages, office supply and document storage, and retail theft prevention, yet still provides an easily installed solution for traditional tool cribs and warehouse security applications. In fact, Series 2180 is perfect for the majority of applications. Since most wire partition applications are 10' or less in height, a competitive stackable system is not usually necessary and requires more time and manpower to install.
|
The tubular frame panel gives the installer clear access to ALL mounting hardware. The strength of the panels provides extra rigidity, nearly eliminating bending and casting. The advanced design includes mounting vertical panels with quick installing flanged head bolts. Generously slotted holes make alignment quick and helps compensate for uneven floors, helped by the use of larger mounting pads than traditional woven wire partition systems providing extra rigidity and security.
|
The welded wire mesh allows for easy cut-outs done in the field around existing pipes, beams, and other barriers, while maintaining its structural integrity. |
Sliding Doors are designed for mounting outside or inside your wire partition. Constructed of the same materials as panels, and hung by 4-wheel trolleys rolling in an enclosed track.
Ask about our slide-up window with shelf and lift catches (pictured above) or fold-down option with bottom hinged sheet metal closure forming the shelf. All doors and windows ship complete with all necessary mounting hardware to install and operate.
Finish: Panels, doors, and posts are phosphate washed with a standard finish of polyester powder coat in high quality gray. Also available in 5 additional standard colors (black, yellow, red, blue, and green) or you can contact our sales team for information regarding custom color matches.
|
Wire Security Cage Panels
|
Wire Security Cage Hardware |
Hinged Doors for Wire Security Cages
|
Sliding Doors for Wire Security Cages |
Panels are constructed of 6-gauge, welded 1 1/2" x 2 1/2" rectangular wire steel mesh securely welded to frames made of 1" square 16-gauge structural tubing, with all joints mig welded. Frames are equipped with 1 1/4" x 3/8" slotted holes for quick mounting. There is a 3" sweep space below the lower horizontal frame member allowing for housekeeping. |
Hardware: All panels and doors are shipped with appropriate hardware including heavy duty 5/16" flanged head bolts and nuts for all panel-to-panel, panel-to-door, and panel/door-to-post connections. Floor and wall anchors can also be furnished upon request.
|
Hinged Doors are constructed of the same materials as panels, and pre-hung in the frame. Swing direction must be designated at time of order (left or right, in or out). Standard openings are 7' high with transoms filling out panel heights of 8', 9', and 10'.
|
Sliding Doors are designed for mounting outside or inside your wire partition. Constructed of the same materials as panels, and hung by 4-wheel trolleys rolling in an enclosed track. |
