H-Post Boltless Shelving Boltless Shelving Boltless Shelving

NationWide Shelving offers Boltless Shelving in Salt Lake City for Industrial Storage Applications which can save you time and space. Interlake Pallet Rack, H-Post, Wide Span System, RivetRite, Boltless and other products make one full line! We have what you need. Our business is to weigh your goals, and deliver a system to compliment them. Custom Design 801-328-8788 Our highly trained designers will take the measurements of your space, and assure you get the most possible storage Simple to complex solutions for all forms of shelving, including sophisticated multi-level and modular applications. Industrial Appications? 801-328-8788 Boltless Shelving Systems in Salt Lake City are carefully engineered systems designed to provide highly efficient storage of all types of items stock and parts. Unparalleled Experience 801-328-8788 With decades of hands on design, installation, and manufacturing experience, no other shelving company has the expertise to match that of NationWide Shelving. We have installed thousands of Penco shelving systems all over the nation. We understand the storage challenges you face, and have designers ready to create innovative solutions.

ZZip Codes, and Area Codes NationWide Shelving offers Sales, parts, relocations/moves and Service for Automated Storage and Retrieval Systems in Boise

83210 Aberdeen ( 208 ) 83350 Acequia ( 208 ) 83520 Ahsahka ( 208 ) 83726 Albertsons ( 208 ) 83311 Albion ( 208 )
83312 Almo ( 208 ) 83611 Alpha ( 208 ) 83610 Alpine ( 208 ) 83211 Am Falls ( 208 ) 83211 American Falls ( 208 )
83401 Ammon ( 208 ) 83406 Ammon ( 208 ) 83647 Anderson Dam ( 208 ) 83442 Annis ( 208 ) 83445 Anthony ( 208 )
83660 Apple Valley ( 208 ) 83338 Appleton ( 208 ) 83212 Arbon ( 208 ) 83440 Archer ( 208 ) 83213 Arco ( 208 )
83423 Argora ( 208 ) 83214 Arimo ( 208 ) 83420 Ashton ( 208 ) 83801 Athol ( 208 ) 83601 Atlanta ( 208 )
83215 Atomic City ( 208 ) 83802 Avery ( 208 ) 83467 Baker ( 208 ) 83217 Bancroft ( 208 ) 83602 Banks ( 208 )
83218 Basalt ( 208 ) 83346 Basin ( 208 ) 83422 Bates ( 208 ) 83803 Bayview ( 208 ) 83401 Beachs Corner ( 208 )
83612 Bear ( 208 ) 83313 Bellevue ( 208 ) 83801 Belmont ( 208 ) 83241 Bench ( 208 ) 83254 Bennington ( 208 )
83220 Bern ( 208 ) 83433 Big Springs ( 208 ) 83221 Blackfoot ( 208 ) 83804 Blanchard ( 208 ) 83314 Bliss ( 208 )
83223 Bloomington ( 208 ) 83464 Blue Dome ( 208 ) 83601 Boise ( 208 ) 83701 Boise ( 208 ) 83702 Boise ( 208 )
83703 Boise ( 208 ) 83704 Boise ( 208 ) 83705 Boise ( 208 ) 83706 Boise ( 208 ) 83707 Boise ( 208 ) 83708 Boise ( 208 )
83709 Boise ( 208 ) 83711 Boise ( 208 ) 83712 Boise ( 208 ) 83713 Boise ( 208 ) 83714 Boise ( 208 ) 83715 Boise ( 208 )
83716 Boise ( 208 ) 83717 Boise ( 208 ) 83719 Boise ( 208 ) 83720 Boise ( 208 ) 83722 Boise ( 208 ) 83724 Boise ( 208 )
83725 Boise ( 208 ) 83726 Boise ( 208 ) 83728 Boise ( 208 ) 83729 Boise ( 208 ) 83731 Boise ( 208 ) 83732 Boise ( 208 )
83735 Boise ( 208 ) 83756 Boise ( 208 ) 83799 Boise ( 208 ) 83728 Boise Cascade ( 208 ) 83725 Boise State University ( 208 )
83278 Bonanza ( 208 ) 83401 Bone ( 208 ) 83805 Bonners Ferry ( 208 ) 83806 Bovill ( 208 ) 83686 Bowmont ( 208 )
83429 Box Canyon ( 208 ) 83313 Broadford ( 208 ) 83604 Bruneau ( 208 ) 83604 Bruneau Valley ( 208 ) 83316 Buhl ( 208 )
83638 Burgdorf ( 208 ) 83318 Burley ( 208 ) 83440 Burton ( 208 ) 83460 BYU-IDAHO ( 208 ) 83811 Cabinet ( 208 )
83808 Calder ( 208 ) 83605 Caldwell ( 208 ) 83606 Caldwell ( 208 ) 83607 Caldwell ( 208 ) 83610 Cambridge ( 208 )
83436 Canyon Creek ( 208 ) 83320 Carey ( 208 ) 83809 Careywood ( 208 ) 83462 Carmen ( 208 ) 83611 Cascade ( 208 )
83321 Castleford ( 208 ) 83810 Cataldo ( 208 ) 83816 CDA ( 208 ) 83631 Centerville ( 208 ) 83241 Central ( 208 )
83226 Challis ( 208 ) 83229 Challis ( 208 ) 83252 Cherry Creek ( 208 ) 83421 Chester ( 208 ) 83217 Chesterfield ( 208 )
83801 Chilco ( 208 ) 83251 Chilly ( 208 ) 83202 Chubbuck ( 208 ) 83346 Churchill ( 208 ) 83811 Clark Fork ( 208 )
83812 Clarkia ( 208 ) 83227 Clayton ( 208 ) 83552 Clearwater ( 208 ) 83436 Clementsville ( 208 ) 83228 Clifton ( 208 )
83316 Clover ( 208 ) 83244 Clyde ( 208 ) 83229 Cobalt ( 208 ) 83813 Cocolalla ( 208 ) 83814 Coeur D Alene ( 208 )
83815 Coeur D Alene ( 208 ) 83816 Coeur D Alene ( 208 ) 83865 Colburn ( 208 ) 83401 Coltman ( 208 ) 83230 Conda ( 208 )
83821 Coolin ( 208 ) 83554 Cooperville ( 208 ) 83805 Copeland ( 208 ) 83322 Corral ( 208 ) 83323 Cotterel ( 208 )
83522 Cottonwood ( 208 ) 83533 Cottonwood ( 208 ) 83612 Council ( 208 ) 83523 Craigmont ( 208 )
83213 Craters of the Moon National ( 208 ) 83622 Crouch ( 208 ) 83672 Crystal ( 208 ) 83301 CSI ( 208 ) 83303 CSI ( 208 )
83524 Culdesac ( 208 ) 83548 Culdesac ( 208 ) 83612 Cuprum ( 208 ) 83328 Curry ( 208 ) 83815 Dalton Gardens ( 208 )
83815 Dalton Gdns ( 208 ) 83252 Daniels ( 208 ) 83255 Darlington ( 208 ) 83232 Dayton ( 208 ) 83823 Deary ( 208 )
83323 Declo ( 208 ) 83316 Deep Creek ( 208 ) 83731 Dept of Transportation ( 208 ) 83824 Desmet ( 208 ) 83324 Dietrich ( 208 )
83233 Dingle ( 208 ) 83261 Dingle ( 208 ) 83525 Dixie ( 208 ) 83605 Doles ( 208 ) 83615 Donnelly ( 208 ) 83825 Dover ( 208 )
83864 Dover ( 208 ) 83234 Downey ( 208 ) 83422 Driggs ( 208 ) 83420 Drummond ( 208 ) 83423 Dubois ( 208 ) 83446 Dubois ( 208 )
83616 Eagle ( 208 ) 83402 Eagle Rock ( 208 ) 83836 East Hope ( 208 ) 83313 East Magic ( 208 ) 83826 Eastport ( 208 )
83672 Eaton ( 208 ) 83325 Eden ( 208 ) 83440 Edmonds ( 208 ) 83445 Egin ( 208 ) 83342 Elba ( 208 ) 83467 Elk Bend ( 208 )
83525 Elk City ( 208 ) 83354 Elk Horn ( 208 ) 83827 Elk River ( 208 ) 83235 Ellis ( 208 ) 83617 Emmett ( 208 ) 83839 Enaville ( 208 )
83605 Enrose ( 208 ) 83322 Fairfield ( 208 ) 83327 Fairfield ( 208 ) 83338 Falls City ( 208 ) 83647 Featherville ( 208 )
83724 Federal Building ( 208 ) 83424 Felt ( 208 ) 83531 Fenn ( 208 ) 83526 Ferdinand ( 208 ) 83812 Fernwood ( 208 )
83830 Fernwood ( 208 ) 83328 Filer ( 208 ) 83236 Firth ( 208 ) 83287 Fish Haven ( 208 ) 83203 Fort Hall ( 208 )
83203 Fort Hall Indian Reservation ( 208 ) 83455 Fox Creek ( 208 ) 83237 Franklin ( 208 ) 83619 Fruitland ( 208 ) 83612 Fruitvale ( 208 )
83313 Gannett ( 208 ) 83703 Garden City ( 208 ) 83714 Garden City ( 208 ) 83214 Garden Creek ( 208 ) 83622 Garden Valley ( 208 )
83629 Gardena ( 208 ) 83835 Garwood ( 208 ) 83832 Genesee ( 208 ) 83238 Geneva ( 208 ) 83239 Georgetown ( 208 )
83463 Gibbonsville ( 208 ) 83203 Gibson ( 208 ) 83641 Givens Hot Springs ( 208 ) 83261 Glencoe ( 208 ) 83623 Glenns Ferry ( 208 )
83633 Glenns Ferry ( 208 ) 83330 Gooding ( 208 ) 83612 Goodrich ( 208 ) 83274 Goshen ( 208 ) 83241 Grace ( 208 ) 83283 Grace ( 208 )
83624 Grand View ( 208 ) 83530 Grangeville ( 208 ) 83531 Grangeville ( 208 ) 83801 Granite ( 208 ) 83401 Grant ( 208 ) 83604 Grasmere ( 208 )
83285 Gray ( 208 ) 83533 Greencreek ( 208 ) 83626 Greenleaf ( 208 ) 83544 Greer ( 208 ) 83657 Gross ( 208 ) 83221 Groveland ( 208 )
83641 Guffey ( 208 ) 83252 Gwenford ( 208 ) 83332 Hagerman ( 208 ) 83333 Hailey ( 208 ) 83348 Hailey ( 208 ) 83425 Hamer ( 208 )
83655 Hamilton Corner ( 208 ) 83627 Hammett ( 208 ) 83334 Hansen ( 208 ) 83552 Harpster ( 208 ) 83833 Harrison ( 208 ) 83842 Harrison ( 208 )
83834 Harvard ( 208 ) 83854 Hauser ( 208 ) 83214 Hawkins ( 208 ) 83835 Hayden ( 208 ) 83835 Hayden Lake ( 208 ) 83335 Hazelton ( 208 )
83546 Headquarters ( 208 ) 83211 Heglar ( 208 ) 83443 Heise ( 208 ) 83823 Helmer ( 208 ) 83445 Heman ( 208 ) 83230 Henry ( 208 )
83336 Heyburn ( 208 ) 83714 Hidden Springs ( 208 ) 83337 Hill City ( 208 ) 83401 Hillview ( 208 ) 83243 Holbrook ( 208 ) 83301 Hollister ( 208 )
83628 Homedale ( 208 ) 83836 Hope ( 208 ) 83612 Hornet ( 208 ) 83629 Horseshoe Bend ( 208 ) 83629 Horseshoe Bnd ( 208 ) 83244 Howe ( 208 )
83446 Humphrey ( 208 ) 83630 Huston ( 208 ) 83735 I D State Dept of Employ ( 208 ) 83631 Idaho City ( 208 ) 83401 Idaho Falls ( 208 )
83402 Idaho Falls ( 208 ) 83403 Idaho Falls ( 208 ) 83404 Idaho Falls ( 208 ) 83405 Idaho Falls ( 208 ) 83406 Idaho Falls ( 208 ) 83415 Idaho Falls ( 208 )
83415 Idaho National Lab ( 208 ) 83720 Idaho State House ( 208 ) 83722 Idaho State Tax Comm ( 208 ) 83756 Idaho State Tax Commission ( 208 )
83209 Idaho State University ( 208 ) 83323 Idahome ( 208 ) 83423 Idman ( 208 ) 83627 Indian Cove ( 208 ) 83632 Indian Valley ( 208 )
83245 Inkom ( 208 ) 83732 Intermountain Gas Co ( 208 ) 83427 Iona ( 208 ) 83428 Irwin ( 208 ) 83429 Island Park ( 208 ) 83433 Island Park ( 208 )
83201 ISU ( 208 ) 83209 ISU ( 208 ) 83350 Jackson ( 208 ) 83274 Jamestown ( 208 ) 83338 Jerome ( 208 ) 83672 Jonathan ( 208 ) 83535 Juliaetta ( 208 )
83536 Kamiah ( 208 ) 83837 Kellogg ( 208 ) 83537 Kendrick ( 208 ) 83340 Ketchum ( 208 ) 83522 Keuterville ( 208 ) 83423 Kilgore ( 208 )
83236 Kimball ( 208 ) 83341 Kimberly ( 208 ) 83633 King Hill ( 208 ) 83839 Kingston ( 208 ) 83605 Knowlton Heights ( 208 )
83539 Kooskia ( 208 ) 83840 Kootenai ( 208 ) 83634 Kuna ( 208 ) 83442 Labelle ( 208 ) 83841 Laclede ( 208 )
83241 Lago ( 208 ) 83635 Lake Fork ( 208 ) 83420 Lamont ( 208 ) 83540 Lapwai ( 208 ) 83638 Lardo ( 208 )
83429 Last Chance Resort ( 208 ) 83246 Lava Hot Springs ( 208 ) 83464 Leadore ( 208 ) 83465 Lemhi ( 208 ) 83541 Lenore ( 208 )
83636 Letha ( 208 ) 83501 Lewiston ( 208 ) 83431 Lewisville ( 208 ) 83254 Liberty ( 208 ) 83423 Lidy Hot Springs ( 208 )
83401 Lincoln ( 208 ) 83286 Linrose ( 208 ) 83464 Lone Pine ( 208 ) 83352 Lone Star ( 208 ) 83442 Lorenzo ( 208 )
83539 Lowell ( 208 ) 83236 Lower Presto ( 208 ) 83278 Lower Stanley ( 208 ) 83637 Lowman ( 208 ) 83542 Lucile ( 208 )
83217 Lund ( 208 ) 83440 Lyman ( 208 ) 83301 Lynwood ( 208 ) 83251 Mackay ( 208 ) 83611 Mackey Bar ( 208 )
83433 Macks Inn ( 208 ) 83252 Malad ( 208 ) 83252 Malad City ( 208 ) 83342 Malta ( 208 ) 83639 Marsing ( 208 )
83420 Marysville ( 208 ) 83253 May ( 208 ) 83716 Mayfield ( 208 ) 83635 McCall ( 208 ) 83638 McCall ( 208 )
83250 McCammon ( 208 ) 83654 Meadows ( 208 ) 83842 Medimont ( 208 ) 83641 Melba ( 208 ) 83314 Mellon Valley ( 208 )
83434 Menan ( 208 ) 83642 Meridian ( 208 ) 83646 Meridian ( 208 ) 83680 Meridian ( 208 ) 83643 Mesa ( 208 )
83644 Middleton ( 208 ) 83645 Midvale ( 208 ) 83343 Minidoka ( 208 ) 83435 Monteview ( 208 ) 83617 Montour ( 208 )
83220 Montpelier ( 208 ) 83254 Montpelier ( 208 ) 83255 Moore ( 208 ) 83634 Mora ( 208 ) 83256 Moreland ( 208 )
83843 Moscow ( 208 ) 83844 Moscow ( 208 ) 83647 Mount Home ( 208 ) 83647 Mountain Home ( 208 )
83648 Mountain Home A F B ( 208 ) 83648 Mountain Home AFB ( 208 ) 83648 Mountain Home Air Force Base ( 208 )
83845 Moyie Springs ( 208 ) 83647 Mtn Home ( 208 ) 83648 Mtn Home AFB ( 208 ) 83450 Mud Lake ( 208 )
83320 Muldoon ( 208 ) 83846 Mullan ( 208 ) 83650 Murphy ( 208 ) 83874 Murray ( 208 ) 83344 Murtaugh ( 208 )
83651 Nampa ( 208 ) 83652 Nampa ( 208 ) 83653 Nampa ( 208 ) 83686 Nampa ( 208 ) 83687 Nampa ( 208 )
83847 Naples ( 208 ) 83865 Naples ( 208 ) 83211 Neeley ( 208 ) 83631 New Centerville ( 208 ) 83654 New Meadows ( 208 )
83655 New Plymouth ( 208 ) 83401 New Sweden ( 208 ) 83436 Newdale ( 208 ) 83543 Nezperce ( 208 ) 83241 Niter ( 208 )
83848 Nordman ( 208 ) 83466 North Fork ( 208 ) 83469 North Fork ( 208 ) 83656 Notus ( 208 ) 83254 Nounan ( 208 )
83346 Oakley ( 208 ) 83647 Oasis ( 208 ) 83657 Ola ( 208 ) 83822 Oldtown ( 208 ) 83855 Onaway ( 208 )
83650 Oreana ( 208 ) 83544 Orofino ( 208 ) 83849 Osburn ( 208 ) 83401 Osgood ( 208 ) 83254 Ovid ( 208 )
83428 Palisades ( 208 ) 83647 Paradise HOT ( 208 ) 83647 Paradise Hot Springs ( 208 ) 83261 Paris ( 208 )
83438 Parker ( 208 ) 83660 Parma ( 208 ) 83253 Patterson ( 208 ) 83347 Paul ( 208 ) 83661 Payette ( 208 ) 83616 Pearl ( 208 )
83217 Pebble ( 208 ) 83545 Peck ( 208 ) 83254 Pegram ( 208 ) 83318 Pella ( 208 ) 83348 Picabo ( 208 )
83546 Pierce ( 208 ) 83647 Pine ( 208 ) 83612 Pine Ridge ( 208 ) 83850 Pinehurst ( 208 ) 83262 Pingree ( 208 )
83631 Pioneerville ( 208 ) 83666 Placerville ( 208 ) 83440 Plano ( 208 ) 83252 Pleasantview ( 208 ) 83851 Plummer ( 208 )
83201 Pocatello ( 208 ) 83202 Pocatello ( 208 ) 83203 Pocatello ( 208 ) 83204 Pocatello ( 208 ) 83205 Pocatello ( 208 )
83206 Pocatello ( 208 ) 83209 Pocatello ( 208 ) 83547 Pollock ( 208 ) 83852 Ponderay ( 208 ) 83429 Ponds Resort ( 208 )
83853 Porthill ( 208 ) 83854 Post Falls ( 208 ) 83877 Post Falls ( 208 ) 83855 Potlatch ( 208 ) 83647 Prairie ( 208 )
83263 Preston ( 208 ) 83873 Prichard ( 208 ) 83856 Priest Lake ( 208 ) 83856 Priest River ( 208 ) 83857 Princeton ( 208 )
83211 Raft River ( 208 ) 83858 Rathdrum ( 208 ) 83238 Raymond ( 208 ) 83278 Redfish Lake ( 208 ) 83423 Reno ( 208 )
83548 Reubens ( 208 ) 83440 Rexburg ( 208 ) 83441 Rexburg ( 208 ) 83460 Rexburg ( 208 ) 83441 Rexcraft ( 208 )
83650 Reynolds ( 208 ) 83349 Richfield ( 208 ) 83604 Riddle ( 208 ) 83442 Rigby ( 208 ) 83549 Riggins ( 208 )
83443 Ririe ( 208 ) 83221 Riverside ( 208 ) 83444 Roberts ( 208 ) 83214 Robin ( 208 ) 83334 Rock Creek ( 208 )
83221 Rockford ( 208 ) 83271 Rockland ( 208 ) 83647 Rocky Bar ( 208 ) 83302 Rogerson ( 208 ) 83221 Rose ( 208 )
83810 Rose Lake ( 208 ) 83615 Roseberry ( 208 ) 83321 Roseworth ( 208 ) 83660 Roswell ( 208 ) 83271 Roy ( 208 )
83343 Rupert ( 208 ) 83350 Rupert ( 208 ) 83809 Sagle ( 208 ) 83860 Sagle ( 208 ) 83445 Saint Anthony ( 208 )
83272 Saint Charles ( 208 ) 83287 Saint Charles ( 208 ) 83401 Saint Leon ( 208 ) 83861 Saint Maries ( 208 )
83467 Salmon ( 208 ) 83870 Sanders ( 208 ) 83864 Sandpoint ( 208 ) 83866 Santa ( 208 ) 83340 Sawtooth City ( 208 )
83415 Scoville ( 208 ) 83274 Shelley ( 208 ) 83401 Shelton ( 208 ) 83324 Shoshone ( 208 ) 83352 Shoshone ( 208 )
83469 Shoup ( 208 ) 83650 Silver City ( 208 ) 83622 Silver Creek Plunge ( 208 ) 83867 Silverton ( 208 )
83423 Small ( 208 ) 83868 Smelterville ( 208 ) 83230 Soda Springs ( 208 ) 83276 Soda Springs ( 208 )
83285 Soda Springs ( 208 ) 83537 Southwick ( 208 ) 83540 Spalding ( 208 ) 83446 Spencer ( 208 )
83869 Spirit Lake ( 208 ) 83318 Springdale ( 208 ) 83277 Springfield ( 208 ) 83278 Stanley ( 208 ) 83669 Star ( 208 )
83631 Star Ranch ( 208 ) 83318 Starrhs Ferry ( 208 ) 83854 State Line ( 208 ) 83631 Steirman ( 208 ) 83210 Sterling ( 208 )
83677 Stibnite ( 208 ) 83552 Stites ( 208 ) 83641 Stoddard ( 208 ) 83252 Stone ( 208 ) 83448 Sugar City ( 208 )
83338 Sugar Loaf ( 208 ) 83353 Sun Valley ( 208 ) 83354 Sun Valley ( 208 ) 83278 Sunbeam ( 208 ) 83440 Sunnydell ( 208 )
83605 Sunnyslope ( 208 ) 83449 Swan Valley ( 208 ) 83281 Swanlake ( 208 ) 83670 Sweet ( 208 ) 83540 Sweetwater ( 208 )
83539 Syringa ( 208 ) 83221 Taber ( 208 ) 83615 Tamarack ( 208 ) 83401 Taylor ( 208 ) 83468 Tendoy ( 208 )
83870 Tensed ( 208 ) 83450 Terreton ( 208 ) 83451 Teton ( 208 ) 83424 Tetonia ( 208 ) 83452 Tetonia ( 208 )
83283 Thatcher ( 208 ) 83221 Thomas ( 208 ) 83221 Thomas Junction ( 208 ) 83440 Thornton ( 208 ) 83301 Three Creek ( 208 )
83302 Three Creek ( 208 ) 83647 Tipanuk ( 208 ) 83246 Topaz ( 208 ) 83227 Torrey ( 208 ) 83333 Triumph ( 208 )
83871 Troy ( 208 ) 83241 Turner ( 208 ) 83314 Tuttle ( 208 ) 83301 Twin Falls ( 208 ) 83302 Twin Falls ( 208 )
83303 Twin Falls ( 208 ) 83445 Twin Groves ( 208 ) 83858 Twin Lakes ( 208 ) 83201 Tyhee ( 208 ) 83454 Ucon ( 208 )
83843 University ( 208 ) 83844 University of Idaho ( 208 ) 83704 Ustick ( 208 ) 83455 Vernon ( 208 ) 83455 Victor ( 208 )
83318 View ( 208 ) 83872 Viola ( 208 ) 83234 Virginia ( 208 ) 83873 Wallace ( 208 ) 83874 Wallace ( 208 ) 83221 Wapello ( 208 )
83254 Wardboro ( 208 ) 83837 Wardner ( 208 ) 83611 Warm Lake ( 208 ) 83420 Warm River ( 208 ) 83671 Warren ( 208 )
83729 Washington Group ( 208 ) 83285 Wayan ( 208 ) 83553 Weippe ( 208 ) 83672 Weiser ( 208 ) 83605 Weitz ( 208 )
83355 Wendell ( 208 ) 83352 West Magic ( 208 ) 83286 Weston ( 208 ) 83201 Westwood Village ( 208 ) 83554 White Bird ( 208 )
83676 Wilder ( 208 ) 83445 Wilford ( 208 ) 83641 Wilson ( 208 ) 83555 Winchester ( 208 ) 83252 Woodruff ( 208 )
83274 Woodville ( 208 ) 83876 Worley ( 208 ) 83677 Yellow Pine ( 208 )

Republic Storage Systems

Boltless Shelving Salt Lake City Specifications

Angle Post

Post material shall be 14 gauge, hot-rolled, pickled and oiled steel. Angle post shall be roll formed, the overall shape being that of an angle, the side leg which shall be 1-7/8", and the front leg which shall be 1". The 1-7/8" leg of the angle shall have a channel shaped rolled into it for added strength. Both legs shall be punched with 5/16" diameter holes on 1-1/2" centers for attaching shelves, backs, uprights and accessories. Rectangular slots 7/16" x 15/32" shall be punched in the 1-7/8" leg to accommodate shelf Boltlesss. Posts shall be longer by 1" than the designated length in feet. Available heights are 3'1" through 16'1". Angle posts are available in 1-1/2" height increments. Overall height of spliced posts will be 2" over the nominal full foot heights.

Beaded Post

Post material shall be 14 gauge, hot-rolled, pickled and oiled steel. Front face of beaded post 7/8". Overall side dimension of post 2-11/16". Post sides to be punched with 5/16" diameter holes on 1-1/2" centers for attaching shelves, side sheets and accessories. 7/16" x 15/32" rectangular slots shall be punched on 1-1/2" centers on both sides for attaching shelf Boltlesss. Posts shall be longer by 1" than the designated length in feet. Available heights are 3'1" through 16'1". Beaded posts are available in 1-1/2" height increments. Overall height of spliced posts will be 2" over the nominal full foot heights. Beaded posts are shipped bundled.

Heavy Duty Post

Post material shall be 14 gauge, hot-rolled, pickled and oiled steel. Rectangular shape with the front width 2" and the side 29/32". Overall depth of post 2-11/16". Post sides punched with 11/32" diameter holes near front, 11/32" x 7/16" oval slots and 15/32" x 7/16" rectangular slots. Keystone slots in front of post 1-1/8" long. Posts are available without keystone slots if required. All holes and slots on 1-1/2" centers. Standard heights 7'1", 8'1", 9'1", 10'1", 11'1" and 12'1". Special heights on 1-1/2" increments. Heavy duty posts are shipped bundled.

Angle Post Splice

Post splice shall be made from 13 gauge, hot-rolled steel. Angle shaped 3/4" x 1-1/8". Length 5". Punched with four 5/16" diameter holes on each leg of angle for attaching to angle posts. Used to tie two angle posts together to obtain higher units. Post splices shipped in cartons.

Beaded Post Splice

Post splice shall be made from 1/4" x 1-1/4" bar stock. Length 5". Punched with four 5/16" diameter holes for attaching to beaded posts. Used to tie two beaded posts together to obtain higher units. Post splices are shipped in cartons.

Heavy Duty Post Splice

Post splice shall be made from 14 gauge steel. Channel shaped and 10" long. Punched with 8 slots 11/32" x 1/2". Splice used to tie two heavy duty posts together to obtain heights greater than 12'1". Post splices are shipped in cartons.

Angle/Beaded Post Foot Plate

Foot plate shall be made from 13 gauge, hot-rolled pickled steel. Used for anchoring angle or beaded posts to floor, also to spread post load over more floor area. Punched with one 5/16" diameter hole for attaching to post and two 7/16" diameter holes for inserting an anchor bolt. Floor must be drilled for anchoring. Size 2-1/8" x 2-7/8". Finish bright zinc plated. Foot plates are shipped in cartons. Anchor bolt not included.

Heavy Duty Foot Plate

Foot plate shall be made from 10 gauge, hot-rolled steel. Punched with 11/32" diameter hole for attaching to post and two 7/16" diameter holes for inserting an anchor bolt. Size 2-7/16" x 3-1/2". Foot plates are shipped in cartons. Anchor bolt not included.

Series 2000 Boltless Shelf

Series 2000 shelf shall be made from 18, 20 or 22 gauge, cold-rolled steel. Has 1-1/4" face on all four sides. Front and rear faces have a closed box formation nominal 1-1/4" x 3/4" bottom flange. The box formation is spot welded to the underside of the shelf on a maximum 8" centers. Sides have a 1/2" bottom return flange at 90 degrees. Shelf is interchangeable for top, bottom or intermediate positions. All four corners are reinforced by lapping and spot welding. Typical widths are 24", 30", 36", 42", 48", 54" and 60". Standard depths are 9", 12", 15", 18", 24", 30", 32" and 36". Overall depth dimension is 5/32" less than nominal size. Overall width dimension is 7/16" less than nominal size. Shelf punched for attaching shelf dividers on 1" centers. Both front and rear faces of shelf are punched for attaching label holder. All four sides of shelf punched at corner for bolting if bolted construction is desired. "Republic, Canton, OH-USA" is stamped on two diagonally opposite corners of the shelf front and rear flange. 18 gauge shelves are stamped on the front and rear flange with the letter "H"; 20 gauge shelves are stamped with the letter "M"; and 22 gauge shelves are stamped with the letter "L". Shelves are shipped in cartons or can be bulk palletized.

Open Flange Boltless Shelf - Plain

Open flange shelf made from 18 or 20 gauge, cold-rolled steel. Has 1-3/16" face on all four sides. Front and rear faces have 3/8" return flange at 45 degrees. Sides have 3/8" return flange at 90 degrees. Shelf is interchangeable for top, bottom or intermediate positions. All four corners are reinforced by lapping and spot welding. Overall depth dimension is 3/16" less than nominal size. Overall width dimension is 7/16" less than nominal size. Shelf punched for attaching shelf dividers on 2" centers. Both front and rear face of shelf punched for attaching angle sway braces. Front and rear face of shelf punched with additional hole in center for attaching label holder. All four sides of shelf punched at corner for bolting if bolted construction is desired. Typical widths are 24", 30", 36", 42" and 48". Standard depths are 12", 15", 18", 24", 30", 32" and 36". "Republic, Canton, OH-USA" is stamped on two diagonally opposite corners of the shelf front and rear flange. 18 gauge shelves are stamped on the front and rear flange with the letter "H" and 20 gauge shelves are stamped with the letter "M". Shelves are shipped in cartons or can be bulk palletized.

Open Flange Boltless Shelf - Class 1B

Class 1B shelf is available in the same specification and sizes as an open flange Boltless shelf except front face is reinforced with 1" x 1/8" band iron bar. Reinforcing bar is attached and locked in place (dimple and crimp) at factory. Alternately, the reinforcing bar can be installed in the field using three 1/4" diameter truss head bolts and hex nuts. Class 1B shelves are shipped in cartons or can be bulk palletized.

Open Flange Boltless Shelf - Class 2B

Class 2B shelf is available in the same specification and sizes as an open flange Boltless shelf except both front and rear faces are reinforced with 1" x 1/8" band iron bar. Reinforcing bars are attached at factory and locked in place (dimple and crimp). Alternately, the reinforcing bars can be installed in the field using three 1/4" diameter truss head bolts and hex nuts. Class 2B shelves are shipped in cartons or can be bulk palletized.

Shelf Reinforcing Bars

Bars shall be made from 1" x 1/8" band iron and are used to reinforce Class 1B and 2B shelves. Normally attached to shelf at factory. Standard widths 24", 30", 36", 42" and 48". Reinforcing bars can be installed in the field using three 1/4" diameter truss head bolts and hex nuts. Reinforcing bars are shipped bundled.

Shelf Reinforcing Angles

Angles shall be 1" x 1" made from 11 gauge, hot-rolled steel and are used to reinforce open flange Boltless shelves. Reinforcing angles not installed at factory. Must be attached by means of bolts and nuts in the field. Reinforcing angles can be used with angle sway braces and label holders. Standard sizes 24", 30", 36", 42" and 48". Reinforcing angles are shipped bundled.

Shelf Reinforcing Hat Channel - Open Flange Boltless Shelf Only

Reinforcing hat channel shall be made of 12 gauge hot rolled steel. The reinforcing hat channel is used to reinforce open flange shelves at the center. They are only used with 18 gauge shelves. When used with side shelf supports and front and rear shelf reinforcing bars, a class 3 shelf is created. Will be punched at ends for attaching to side shelf supports. The shape is that of a hat. The flanges are 1/2" long. The height of the hat is 1-1/16". The width of the hat is 3/4" at the top. This channel is field attached. Lengths are available for 30", 36", 42" & 48" shelves. Reinforcing hat channels are shipped in cartons.

Shelf Reinforcing Hat Channel - Series 2000 Boltless Shelf Only

Reinforcing hat channel shall be made of 16 gauge, cold-rolled steel. The reinforcing hat channel is used to reinforce Series 2000 shelves at the center. They are only used with 18 gauge shelves. When used with side shelf supports a class 3 shelf is created. Will be punched at ends for attaching to side shelf supports. The shape is that of a hat. The flanges are 3/4" long. The height of the hat is 1-9/64". The width of the hat is 1-1/4" at the top. This channel is field attached. Lengths are available for 30", 36", 42" & 48" shelves. Reinforcing hat channels are shipped in cartons.

Side Shelf Support

Side shelf support shall be made from 13 gauge, hot-rolled steel. Each end of side shelf support provided with two lugs for attaching to posts. Top edge offset at each end to hold shelf and flanged at the center to support the shelf reinforcing hat channel. Flange at center provided with hole for attaching shelf reinforcing hat channel. Standard sizes 18", 24", 30" and 36". To be used in pairs. Overall length dimension is 1-3/16" less than listed size. Side shelf supports are shipped in cartons.

Shelf Boltless

Shelf Boltless shall be made from 13 gauge, hot-rolled, pickled and oiled steel. Width 29/32", overall length 3-17/64". Finish shall be bright zinc plated. "Republic" is stamped on the inside surface of shelf Boltless. Shelf Boltlesss are available in packages of 100 or can be bulk shipped in cartons. Four shelf Boltlesss per shelf are automatically furnished with Open Flange and Series 2000 Boltless Shelves.

Half Shelf Boltless

Half shelf Boltless shall be made from 13 gauge, hot-rolled, pickled and oiled steel. Width 29/32", overall length 2-11/32". Finish shall be bright zinc plated. When 1-1/2" bases are ordered, 4 half Boltlesss are automatically furnished.

Backs

Backs shall be made from 24 gauge, cold-rolled steel. Back shall have three rows of 3/8" diameter holes punched on 1-1/2" centers. The two outside rows punched to coincide with the holes in the 1" flange of the angle post. The middle row of holes shall be used to attach back to open flange shelves by use of back Boltlesss. Width of back is 13/16" less than nominal sizes. Standard widths 24", 30", 36", 42", 48", 54" and 60". Standard heights 3'1", 3'4", 5'1", 6'1", 7'1" and 8'1". 54" & 60" wide backs are limited to a maximum height of 5'-1". Backs are available in 1-1/2" increments. On shelving units above 8'-1" that do not use spliced posts, two shorter backs will be combined to achieve the necessary height (i.e. two 5'-1" backs would be used for a 10'-1" unit). A minimum of 1" overlap would result. On units where the posts are spliced, the height of the back will match the height of the post making the unit 2" taller than nominal. Back splices may be required where the backs are exposed. Backs are shipped bundled.

Back Boltless (used with Open Flange Boltless Shelf only)

Back Boltless shall be made from 20 gauge, cold-rolled steel. 1" wide by 3-5/8" long. Finish shall be bright zinc plated. Used to attach open flange shelf to back on single-faced, closed-type unit. "Back shelf only" is stamped on surface of back Boltless. Back Boltlesss are available in packages of 100 or can be bulk shipped in cartons. Back Boltlesss are automatically furnished with backs.

Back Splice

Back splice shall be made from 22 gauge, cold-rolled steel. Height 5", standard widths 24", 30", 36", 42", 48", 54" and 60". Punched with three rows of 5/16" diameter holes for attaching to backs and posts. Used to tie backs when posts are spliced and the backs are exposed. Overall width is 3/16" less than listed size. Back splices are shipped bundled.

Upright Side Sheet

Upright side sheet shall be made from 24 gauge, cold-rolled steel. Each side punched with 3/8" diameter holes on 1-1/2" centers. No center row of holes. Overall depth dimension is 2-9/16" less than listed depths. Standard available depths are 12", 15", 18", 24", 30", 32" and 36". Heights available 3'1" to 8'1" in height increments of 1-1/2". On shelving units above 8'-1" that do not use spliced posts, two shorter upright sheets will be combined to get the necessary height (i.e. two 5'-1" would be used for a 10'-1" unit). A minimum of 1" overlap would result. On units where the posts are spliced, the height of the upright sheet will match the height of the post making the unit 2" taller than nominal. Side sheet splices may be required where the Upright Side Sheets are exposed. Upright side sheets are shipped bundled.

Side Sheet Splice

Side sheet splice shall be made from 22 gauge, cold-rolled steel. Height 5", standard depths 12", 15", 18", 24", 30", 32" and 36". Overall depth is 2-5/8" less than listed size. Offset at each end to fit around post. Each end punched with four 5/16" diameter holes for attaching to upright and posts. Used to tie Upright Sheets together when posts are spliced and the Upright Sheets are exposed. Side sheet splices are shipped bundled.

End Upright Assembly - Angle Post

End upright assembly consists of one plain upright sheet and two angle posts welded together to form one assembly. Maximum spacing of spot welds shall be 7-1/2" centers. Heights available 3'1" to 10'1" in height increments of 1-1/2". Heights greater than 10'1" may be obtained by splicing two standard size end upright assemblies together with angle post splices. Overall height of spliced upright will be 2" over nominal full foot height. End upright assemblies are shipped bundled.

Intermediate Upright Assemblies - Angle Post

Intermediate upright assembly consists of one plain upright sheet and four angle posts welded together to form one assembly. Maximum spacing of spot welds shall be 7-1/2" centers. Heights available 3'1" to 10'1" in height increments of 1-1/2". Heights greater than 10'1" may be obtained by splicing two standard size intermediate upright assemblies together with angle post splices. Overall height of spliced upright will be 2" over nominal full foot height. Intermediate upright assemblies are shipped bundled.

End Upright Assembly - Beaded & Angle Post

Beaded post end upright assembly consists of one plain upright sheet, one beaded post and one angle post welded together to form one assembly. Maximum spacing of spot welds shall be 7-1/2" centers. Heights available 3'1" to 10'1" in height increments of 1-1/2". Heights greater than 10'1" may be obtained by splicing two standard size end upright assemblies together with beaded and angle post splices. Overall height of spliced upright will be 2" over nominal full foot height. Beaded post end upright assemblies are shipped bundled.

Intermediate Upright Assembly - Beaded & Angle Post

Beaded post intermediate upright assembly consists of one plain upright sheet, one beaded post and two angle posts welded together to form one assembly. Maximum spacing of spot welds shall be 7-1/2" centers. Heights available 3'1" to 10'1" in height increments of 1-1/2". Heights greater than 10'1" may be obtained by splicing two standard size intermediate upright assemblies together with beaded and angle post splices. Overall height of spliced upright will be 2" over nominal full foot height. Beaded post intermediate upright assemblies are shipped bundled.

Sway Braces - Side or Back

Diagonal sway braces shall be made from 3/4" x 12 gauge steel and are punched at each end with 9/32" diameter hole for attaching to angle or beaded post. Standard sizes 20-7/8" long for units 9" and 15" deep; 34-11/16" long for units 12" and 24" deep, and units 24" wide; 40-29/32" long for units 18" and 24" deep, and for units 30" wide; 46-21/32" for units 32" deep; 50-7/16" long for units 30" and 36" deep, and units 36" wide; 62-9/32" long for units 42" and 48" wide; 64-9/32" long for units 54" wide and 69-5/16" for units 60" wide. Sway braces are shipped bundled.

Angle Sway Braces

Angle sway braces shall be made from 12-gauge, hot-rolled steel. Each leg of right angle is 25/32" wide by 4" long. Punched with holes for attaching to angle post and open flange shelf. Used when diagonal sway braces are not desired on back of units. Cannot be used with Series 2000 shelf. Angle sway braces are shipped in cartons.

Heavy Duty Side Sway Braces

Sway brace shall be made from 1" x 11 gauge steel with two 11/32" diameter end holes. Formed with offset 4" from each end. Approximate lengths are 35-1/8", 44-5/8", 51-5/8" and 65". Sway braces are shipped bundled.

Heavy Duty Rear Sway Braces

Sway brace shall be made from 1" x 11 gauge steel with two 11/32" diameter end holes. Attachment Boltless material is 14 gauge, angle shaped with 7/8" leg and 1-5/8" leg, 2-5/8" long. Sway braces are shipped bundled.

Heavy Duty Tie Boltlesss

Tie Boltless material shall be 16 gauge, cold-rolled steel. Oval shaped 1" x 1-11/16" long with two 11/32" diameter holes. Used to tie back to back heavy posts together. Tie Boltlesss are shipped in cartons.

Front Base - Angle and Beaded Post

Front base shall be made from 22 gauge, cold-rolled steel in widths up to 48" and 18 gauge for 54" and 60" wide. The top and bottom flanges are 1/2". The 1-1/2" and 3" high bases are punched with one hole at each end. The 4-1/2" base is punched at each end with two holes. The 1-1/2" high base positions the bottom shelf 2-1/2" off the floor. The 3" high base positions the bottom shelf 4" off the floor and the 4-1/2" base positions the bottom shelf 5-1/2" off the floor. Standard heights 1-1/2", 3" and 4-1/2". Standard widths 24", 30", 36", 42", 48", 54" and 60". Base fronts shipped in cartons. Overall height dimension is 1/8" less than listed size. Overall length dimension 5/8" less than listed size.

Front Base Attachment (Angle Post)

Front base for angle posts is attached to post by two Tinnerman nuts and two #10 x 1/2" sheet metal screws. On 4-1/2" high bases, use four attachments. Half shelf Boltlesss are automatically furnished with 1-1/2" bases.

Front Base Attachment (Beaded Post)

Front base for beaded posts is attached by using two base Boltlesss and attached to the post with bolts and nuts. The base Boltless is then attached to the base front by sheet metal screws. On 4-1/2" high bases, use four attachments. Half shelf Boltlesss are automatically furnished with 1-1/2" bases.

Base Boltless

Base Boltless used to attach front bases to beaded post. Boltless is made from 18 gauge steel. One side punched with 5/16" diameter hole for attaching to beaded post with bolt and nut. Other side punched with 5/32" diameter hole for attaching to front base with sheet metal screw. The base Boltless used with 1-1/2" high bases is 7/16" wide x 1" high x 1-5/16" deep. The base Boltless used with 3" and 4-1/2" high bases is 1-1/16" wide x 3/4" high x 1-1/16" deep. Different Boltlesss are used because on the 1-1/2" high base the base Boltless bolts to the half shelf Boltless. Finish bright zinc plated. Base Boltlesss are shipped in cartons.

End Base

End base shall be made of 22 gauge, cold-rolled steel. Base end is attached by two Tinnerman nuts, and two #10 x 3/4" sheet metal screws. End base may be used with angle, beaded or heavy duty posts. Standard heights 1-1/2" and 3". Standard depths 12", 15", 18", 24", 30" and 36". Overall length is 2-11/32" less than listed size. Overall height dimension is 1/8" less than listed size. End bases are shipped bundled.

Universal Bin Front - Angle and Beaded Post

Bin fronts are universal for angle and beaded posts. Bin front shall be made from 18 gauge, cold-rolled steel. Top and bottom have flanges so bin front may be used as a card holder. Overall width is 7/8" less than listed lengths. Standard heights 1-1/2", 3", 4-1/2" and 6". Standard widths 36", 42" and 48". Two end Boltlesss required for each bin front. Bin fronts are shipped in cartons.

Bin Front Boltless

Bin front Boltless shall be made from 18 gauge, cold-rolled steel. Left hand and right hand Boltlesss provided with lugs to hold Boltlesss to posts. A locking tab is provided at bottom of Boltless so bin Boltless will not lift out of post slots when removing bin fronts. Boltlesss formed to provide channel to hold bin front in place. Bright zinc plated finish. Two Boltlesss furnished with 1-1/2" and 3" high bin fronts. Four Boltlesss furnished with 4-1/2" and 6" high bin fronts. Bin front Boltlesss are shipped in cartons.

Label Holder

Label holder shall be made from 28 gauge, cold-rolled steel. Face of label holder 7/8" and punched with three 5/16" diameter holes for attaching to front face of open flange shelf with Tinnerman Boltlesss or Series 2000 shelf with nylon panel Boltlesss. Top and bottom folded over provides a groove for inserting of 1" labels. Standard widths 36", 42" and 48". Overall width dimension is 2-1/4" less than listed size. Label holders are shipped in cartons.

Shelf Divider - Main

Shelf divider shall be made from 22 gauge, cold-rolled steel up to and including 18" high. 21" and 24" high dividers shall be made from 20 gauge, cold-rolled steel. Front and rear edges beaded. Top and bottom have 3/4" flange punched with two 5/16" x 1/2" slots for attaching to open flange shelf with Tinnerman Boltlesss or Series 2000 shelf with nylon panel Boltlesss. Overall is 13/16" less than listed depth. Standard depths 12", 15", 18" and 24". Standard heights 6", 7-1/2", 9", 10-1/2", 12", 13-1/2", 15" 16-1/2" and 18". If dividers are used with shelves having class 3 reinforcing hat channel, they must be specially notched. Main dividers are shipped in cartons.

Shelf Divider - Ledge

Ledge dividers are the same as main dividers except overall depth is same as listed size and they must be used in ledge positions. Standard depth 12". Standard heights 6", 9", 16 1/2" and 18". Ledge dividers are attached with Tinnerman spring Boltlesss. Ledge dividers are shipped in cartons. Cannot be used with Series 2000 shelves.

Angle Divider

Angle divider shall be made from 22 gauge, cold-rolled steel. Angle dividers have 3/4" flange at bottom only. Bottom flange punched with two 5/16" x 1/2" slots for attaching to shelf at bottom only. Must be attached with bolts and nuts. Overall depth is 13/16" less than listed depth. Standard depths 12" and 18". Standard heights are 2", 3" and 4". Angle dividers are shipped in cartons.

Sliding Divider

Sliding divider shall be made from 22 gauge, cold-rolled steel. Front face is 3" x 1-3/8" with a 3" x 1" tabbed label holder formed into the front face. The sliding divider base which sets on top of the shelf is 3" wide by shelf depth with a 1/4" flange at rear. Standard depths are 12" and 18". Overall depths are 7/64" less than listed size. Standard heights are 4" and 6". Sliding dividers are shipped in cartons.

Heavy Duty Sliding Divider

Sliding divider shall be made from 18 gauge, cold-rolled steel. Front face is 3" x 1-3/8. The sliding divider base which sets on top of the shelf is 3" wide by shelf depth with a 9/16" flange at rear. The heavy duty sliding divider has no tabbed label holder. Standard depths are 12", 15" and 18". Overall depth is 1/64" less than listed size. Standard height is 6". Heavy duty sliding dividers are shipped in cartons.

Shelf Box

Shelf boxes 4-1/8", 5-1/2" and 8-3/8" wide shall be made from 22 gauge, cold-rolled steel. 11-1/8" wide box shall be made from 20 gauge, cold-rolled steel. Shelf box made from three-piece welded construction. Rigid handle provided at front of box. Label holder on front and rear. Box slotted for dividers on 1" centers. All shelf boxes are 4-5/8" high and fit between shelves spaced on 6" centers. Standard widths 4-1/8", 5-1/2", 8-3/8" and 11-1/8". Standard depths 11-5/8", 17-5/8" and 23-5/8". Shelf boxes are shipped in cartons.

Box Divider

Box divider shall be made from 26 gauge, cold-rolled steel. Punched for card holder so that every compartment can be indexed. Standard width sizes 4-1/8", 5-1/2", 8-3/8" and 11-1/8". Standard height 4-5/8". Box dividers are shipped in cartons.

Box Guide

Box guide shall be made from 24 gauge, cold-rolled steel. Used as guide on side of shelf to prevent angle post from interfering with sliding boxes. Two box guides required per shelf. Attached to posts by bolt and nut. Overall height 1-3/8". Standard depths 12", 15", 18" and 24". Overall depth dimension is 1/2" less than listed size. Box guides are shipped in cartons.

Doors - Swinging

Doors shall be made from 20 gauge, cold-rolled steel, top and bottom frame 16 gauge, cold-rolled steel, side frame 14 gauge and reinforcing panel 24 gauge. Each door is reinforced on the inside to prevent warping and each pair has its own rigid frame to prevent sag. A three-point locking mechanism is controlled by an "L" shaped handle with a built-in lock. Standard widths are 36" and 48". Shelving unit must be plumb and square before installing swinging doors. Swinging doors are shipped in cartons.

Counter Tops - Both Ends Finished

Counter top shall be made from 14 gauge, hot-rolled, pickled and oiled steel. Face of counter top is 1-1/8". The face of the top projects 1-3/16" beyond face of post. Two 1/2" x 7/8" 16 gauge angles welded to the underside of top for attaching to posts. Counter tops must be attached by bolting. Unable to attach with shelf Boltless. Overall depth of counter top 2-7/16" greater than listed size. Overall width of counter top is 2-7/16" greater than listed size. Standard width 36". Standard depth 24". Counter tops are shipped bundled with corrugated wrapper.

Counter Tops - One End Finished

Counter top shall be made from 14 gauge, hot-rolled, pickled and oiled steel. Face of counter top is 1-1/8". The face of the top projects 1-3/16" beyond face of post. Two 1/2" x 7/8" 16 gauge angles welded to the underside of top for attaching to posts. Counter tops must be attached by bolting. Unable to attach with shelf Boltless. Overall depth of counter top 2-7/16" greater than listed size. Overall width of counter top is 1-7/32" greater than listed size. Standard width 36". Standard depth 24". Counter tops are shipped bundled with corrugated wrapper.

Counter Tops - Intermediate

Counter top shall be made from 14 gauge, hot-rolled, pickled and oiled steel. Face of counter top is 1-1/8". The face of the top projects 1-3/16" beyond face of post. Two 1/2" x 7/8" 16 gauge angles welded to the underside of top for attaching to posts. Counter tops must be attached by bolting. Unable to attach with shelf Boltless. Overall depth of counter top is 2-7/16" greater than listed size. Overall width of counter top is the listed size. Standard width 36". Standard depth 24". Counter tops are shipped bundled with corrugated wrapper.

Counter Front

Counter front shall be made from 18 gauge, cold-rolled steel. Counter front to have 41/64" flange at bottom. Each side punched with 3/8" diameter holes on 1-1/2" centers. No center row of holes. Overall width is 3/4" less than listed size. Standard width 36". Standard height 40". Counter fronts are shipped in cartons.

Ledge Tops

Ledge top shall be made from 14 gauge, hot-rolled, pickled and oiled steel. Face of ledge top is 1-1/8". Ledge top to project 1-3/16" beyond the face of the post and has two 1/2" x 7/8" 16 gauge angles welded to the underside for attaching to post. Rear flange of ledge top to be punched for bolting to the shelf in the main unit. Same top used at end or intermediate position. Ledge top must be bolted and cannot be used with shelf Boltless. Overall depth 1-11/32" greater than listed size. Standard width 36". Standard depth 12". Ledge tops are shipped bundled with corrugated wrappers. Cannot be used with Series 2000 Shelves.

Ledge Top Ends

Ledge top end is 1/4" x 1-1/4" bar used to close ends of ledge tops. Reversible for use at either right or left hand end assembly. Attached by bolts and nuts. Standard size 36" wide x 12" deep. Ledge top ends are shipped in cartons.

Divider Strip

Divider strip shall be made from 16 gauge, cold-rolled steel. Is 1" wide and has 9/64" long extrusions on 1" centers. Used for holding in place ledge or main dividers under ledge or counter top. Divider strips are not bolted to ledge or counter tops, but held in place by dividers. Overall width is 11/16" less than listed width. Standard length 36". Divider strips are used in pairs. Divider strips are shipped in cartons. Cannot be used with Series 2000 Shelves.

Post Corner Cover Plate

Corner cover plate shall be made from 22 gauge, cold-rolled steel. Used to cover corner angle posts to give finished appearance. Formed in shape of angle, front leg 1-9/16", side leg 2-1/2". Attached to post by means of #12 x 1/2" sheet metal screw. No holes on outside corner cover plate. Standard lengths are 3'4", 6'-1" and 7'1". Corner cover plates are shipped in cartons.

Post Intermediate Cover Plate

Intermediate cover plate shall be made from 22 gauge, cold-rolled steel. Used to cover angle posts at intermediate position to give finished appearance. Attach by placing leg of Boltless angles, which are spot welded to cover, between legs of angle posts. No holes on outside of intermediate cover plate. Overall width 2-1/4". Standard lengths are 3'4", 6'-1" and 7'1". Intermediate cover plates are packed in a carton.

Post Side Cover Plate

Cover plate shall be made from 22 gauge, cold-rolled steel. Used to cover side of angle post when door is used to give finished appearance. Overall width 2", attached by means of #12 x 1/2" sheet metal screw. No holes on outside face of cover plate. Standard sizes 3'4", 6'1", and 7'1". Cover plates are packed in a carton.

Maxi-Stor Drawer Specification

Drawer - standard width is 36"; standard depths are 18" and 24"; standard heights are 3", 4", 5", 6" and 7". Front is 13 gauge steel - flanges at sides and bottom. Body is 18 gauge steel, sides and back ribbed and slotted to receive partitions and dividers on approximate 1" centers. Drawer track is 11 gauge steel Z member. Extruded anodized aluminum pull with label holder provision extends the full width of drawer - side flanges of drawer contoured to conceal ends of pull.

Cradle or Progressive Suspension - 12 gauge steel channels with 2 fleating and 3 ball bearing steel rollers mounted to each channel to assure smoother, friction-free movement. The cross tie channels of the cradle are 14 gauge steel. A 14 gauge stop Boltless is built into the cradle to limit its motion but can easily be removed without tools to remove cradle from case track.

Case Track - 10 gauge steel, installed without use of mechanical fasteners. The case track attaches to the front and rear frames and is fixed into place using the built in locking device.

Front and Rear Frames - standard width is 36"; standard depths are 18" and 24"; standard height openings are 6", 18", 32" and 36". 14 gauge, welded, bolted to front and rear posts of shelving unit to maintain squareness and provide support for the case tracks and drawer. 1" on center vertical adjustment.

Partition Dividers - 22 gauge steel partition dividers are slotted to receive cross dividers on approximately 1" centers.

Cross Dividers - 22 gauge steel cross dividers are fabricated in lengths of 3", 4", 5", 6", 8", 9', 10" and 12".